You will receive 20 random full color screen clear film matte print transfers. Transfer grab bags will include current seasonal, up coming season and year round prints. Each print will be $3.00 each!!!!
- Preheat press to 325 Degrees fahrenheit.
- Set your pressure to Medium or approximately 5-7 PSI.
- Lint roll your choice of garment and center on your heat press.
- Once your press is heated to 325 degrees, prepress your garment for 5-7 seconds to remove wrinkles and any moisture that may be present in the garment/item.
- Place your transfer face down where the design is laying on your garment/item.
- At this time you will want to make sure your garment/item is centered on your press or in your desired location. You may also apply some heat proof tape to make sure the transfer does not move when pressed.
- Lower the handle on your clamp heat press for 7-10 seconds (I always press for 10 seconds)
- Once your 7-10 seconds has passed or until your heat press beeps, raise the press handle and peel the transfer while it is still hot. NOTE: If you wait too long the to peel, the transfer may re-adhere to transfer paper again.
- If after you press your transfer and attempt to perform a hot peel, your screen print does not release from the transfer paper, repress for 2-4 Seconds.
- Teflon sheets are not needed when pressing screen prints. However, there may be instances where a Pressing Pillows would need to be used, For example: if the item has seems that may interfere with pressing the transfer evenly, such as a onesie or toddler shirt.